Polyamides are partially crystalline plastics which offer an ideal combination of properties especially for technical applications. They combine a high mechanical strength and stiffness with good electrical insulation properties, a high resistance to heat and chemicals, low friction, good emergency running properties, wear resistance and the attenuation of noise and vibration, plus outstanding ease of processing.

Depending on the particular material and grade concerned, polyamides absorb moisture from the environment on a reversible basis. This has the same effect as a plasticizer, i.e. the tensile strain at break and toughness increase while the strength and stiffness are reduced.

Durethan B 30 S 000000
PA 6, injection molding-grade, non-reinforced, easy-flow, easy-release, rapid solidification  

Durethan B 40 E 000000
PA 6 extrusion grade, standard grade of high viscosity with processing aid/lubricant, not nucleated., Extruded semi-finised products made by the cooled-die process. Solid rods up to approx. 250 mm in diameter. Tube extrusion by the water tank calibration method up to a diameter of approx. 50 mm, corrugated pipes.
Injection molding of casters and rollers.  

Durethan BC 30 000000
PA 6, injection molding grade, non-reinforced, rapid processing, higher notched impact strength than B 30 S / B 31 SK in dry and conditioned state, impact-modified, automotive: window-handle, cable clips, safty belt covers, wall-pegs, dowels, tool-handels  

Durethan BKV 130 000000
CoPA, injection molding grade, 30 % glass fibers, elastomer modified, electroplateable, higher notched impact strength and also higher energy absorption under biaxial impact load than BKV 30, even in the dry state, Automotive seats and back rests, office chair-legs, seat-pans, full-plastic shopping-car  

Durethan BKV 130 H2.0 901510
CoPA, injection molding grade, 30 % glass fibers, elastomer-modified, electroplateable, improved notched impact strength and energy absorption under biaxial impact load, good heat-ageing resistance  

Durethan BKV 140 000000
CoPA, injection molding grade, 40 % glass fibers, elastomer-modified, electroplateable, higher notched impact strength and also higher energy absorption under biaxial impact load than BKV 40, even in the dry state  

Durethan BKV 15 H1.0 000000
CoPA, injection molding grade, 15 % glass fibers, good heat-ageing resistance, Automotive indoor window frames