DuPont Selar amorphous nylon
Selar PA can be blended with nylon 6 and with EVOH to provide certain property and processing advantages. Selar PA has a low toxicity by ingestion and is neither a skin irritant nor a skin sensitizer. One should avoid heating the resin above 340°C (644°F). When resins are overheated, decomposition with fume evolution may occur. As with most plastics, local ventilation should be used to avoid exposure to fumes which may be irritating to the eyes, nose, throat, and upper respiratory tract. As with any hot material, care should be taken to protect the hands and other exposed parts of the body when working with molten polymer. If molten polymer contacts the skin, cool the affected area with cold water or ice. Do not attempt to peel the solidified polymer from the skin. Obtain medical attention for thermal burn. Pellets of resins can be a slipping hazard. Loose pellets should be swept up promptly to prevent falls. Disposal of scrap presents no special problems and can be by landfill or incineration in a properly operated incinerator. Disposal should comply with local, state, and federal regulations. For more detailed information on the safe handling and disposal of resin.
amorphous nylon (polyamide) resin which exhibits superior transparency, good barrier properties to gases, water, solvents and essential oils and high temperature structural properties which make it suitable for consideration in a number of applications.Selar PA3426 complies with FDA regulation 21 CFR 177.1500 (a)(12) regarding food contact. Selar PA can be used with all types of food, except those with more than 8% alcohol. There is no FDA limitation on the temperature of the food or the thickness of the Selar PA in contact with the food.
amorphous nylon (polyamide) resin which exhibits superior transparency, good barrier properties to gases, water, solvents and essential oils and high temperature structural properties which make it suitable for consideration in a number of applications.Selar PA2072 barrier resin can be utilized in both flexible and rigid packaging structures and is characterized by very good gas O2, CO2 and moisture barrier. Furthermore,
**any questions ,Please e-mail to: firstname.lastname@example.org