BASF of acetal polyoxymethylene (POM) copolymer products under the tradename Ultraform® are available from BASF. The Ultraform acetal product range comprises versatile engineering plastics having varied properties designed for use in exacting components capable of withstanding high stresses. The Ultraform acetal grades fulfill the demands imposed on an engineering material in especially high measure. They combine high rigidity with mechanical strength and afford good elastic properties, high toughness, dimensional stability and excellent sliding friction properties.
Ultraform H 2320 006 Q600 is a POM with high molecular weight grade for injection molding. It conforms to FDA requirements of 21 CFR 177.2470.
Ultraform H 4320 Q600 is an extrusion POM high molecular weight grade. This grade enables high extrusion rates with thick-walled product. It also exhibits high thermal stability and a low tendency to discolor.
Ultraform N 2200 G43 UNC Q600 is a 20% glass fiber reinforced POM injection molding grade with enhanced stiffness and toughness.
Ultraform N 2200 G53 UNC Q600 is a 25% glass fiber reinforced POM injection molding grade with enhanced stiffness and toughness.
Ultraform N 2310 P Q600 is a general-purpose injection molding POM grade containing special lubricant. Low frictional coefficient giving extremely low wear with otherwise unaltered mechanical properties.
Ultraform N 2320 003 UNC Q600 is a rapidly freezing general-purpose injection-molding POM grade. It contains a mold release agent.
Ultraform N 2320 U03 UNC Q600 is a rapidly freezing UV stabilized general-purpose injection molding grade.
Ultraform N 2720 M43
Ultraform N 2720 M63 .
Ultraform N 2640 Z4 UNC Q600 is a high toughness, elastomer-modified injection molding POM grade.
Ultraform N 2640 Z6 UNC is an elastomer-modified injection molding POM grade with excellent impact strength.
Ultraform S 2320 003 UNC Q600 is an easy flowing and rapidly freezing injection molding POM grade. Contains a mold release agent.
Ultraform W 2320 003 UNC Q600 is a very easy flowing and rapidly solidifying injection molding POM grade for use where processing is extremely difficult but mechanical properties are lower. Contains a mold release agent. It conforms to FDA requirements of 21 CFR
