Grilon PA6,
The name Grilon stands for a wide assortment of products available with different basic polyamides and modified with additives and fillers. This allows us to satisfy a wide spectrum of customer requirements.

Along with the range of basic products, grades with high impact strength, high stiffness, flame retardancy, electrical conductivity, etc. are available. We also offer variety of products for processing according to current process technologies such as injection moulding, extrusion, injection blow moulding, etc.

The Grilon sub-groups:

• Grilon A: PA66
• Grilon B: PA6
• Grilon C: Copolyamide
• Grilon BT: PA6 alloys
• Grilon ELX:PA6 elastomers
• Grilon F: PA6 film products

Grilon BS V0 is an unreinforced, normal viscosity, self-extinguishing PA6 injection moulding grade. 

Grilon BZ 3/2 is an unreinforced, high impact resistant PA6 injection moulding grade. Grilon BZ 3/2 characterises itself through the following properties: very high toughness and impact strength, easy to process, low density. 

Grilon BR 40 W is a medium viscosity, plasticised PA6 extrusion grade. Grilon BR 40 W characterises itself through the following properties: High flexibility, high impact strength 

Grilon BG-30 is a heat stabilised PA6 injection moulding grade with 30% glass-fibres. 

Grilon BG-30/2 is a heat stabilised PA6 injection moulding grade with 30% glass fibres. 

Grilon BG-30 S is a heat stabilised PA6 injection moulding grade with 30% glass fibres. 

Grilon BG-30 S is characterised through the following properties: Very good surface finish, good flow and easy processing

Grilon BG-50 is a heat stabilised, normal viscosity PA6 injection moulding grade with 50% glass-fibres.

Grilon BGZ-15/2 is a heat stabilised and impact modified PA6 injection moulding grade with 15% glass fibres. 

Grilon BGZ-15/2 characterises itself through the following properties: Good impact strength, high stiffness, easy processing. 

Grilon BGZ-30/2is a heat stabilised and impact modified PA6 injection moulding grade with 30% glass fibres. 

Grilon BGZ-30/2 characterises itself through the following properties: Good impact strength, high stiffness, easy processing. 

Grilon BGZ-50/2 is a heat and UV stabilised, impact modified PA6 injection moulding grade with 50% glass fibres.

 GrilonBGZ-50/2 characterises itself through the following properties: Good impact strength, very high stiffness, easy processing. 




Grilon CF-7 is a co-polyamide for blending with EVOH.



We were territorial allocation of market  Salesing to: China.