TESTS |
Typical Values |
Test Condition |
Unit |
Test Method |
Vertical Bunsen Burner test (60s):
- Average after flame time
- Average after flame time of drips |
passed
< !?
< !? |
1.5 mm & 2.0 mm & 3.0 mm
thickness |
s |
FAR 25.853 (a) /
AITM 2.0002 B |
Vertical Bunsen Burner test (12s):
- Average after flame time
- Average after flame time of drips |
passed
< !?
< !? |
1.5 mm & 2.0 mm & 3.0 mm
thickness |
s |
FAR 25.853 (a) /
AITM 2.0002 A |
Smoke density Ds 4.0 min |
passed
< !? |
1.5 mm & 2.0 mm & 3.0 mm
thickness |
|
ASTM E 662 /
AITM 2.0007 B
(flaming mode) |
Content of toxic smoke ingredients
after 4.0 min:
CO
SO2/H2S
NO/NO2
HF
HCN
HCl |
passed
< !?
< !?
< !?
< !?
< !?
< !? |
1.5 mm & 2.0 mm & 3.0 mm
thickness |
ppm |
AITM 3.0005
(flaming mode) |
Heat release (OSU):
- Average total positive heat release (HR) over the first two minutes
- Average maximum heat release (HRR) during the five minutes test |
passed
< !?
< !? |
1.5 mm & 2.0 mm & 3.0 mm
thickness |
kW*min/m²
kW/m² |
FAR 25.853 (c) /
AITM 2.0006 |
|
|
|
|
|
Notes: makes < !? This information is subject to a confidentiality clause and must not be disclosed publicly. If you require this Values, please provide the project information and request it from your sales manager. Any inquire please send e-mal to: x.g.chiang@gmail.com |