UTECHLLAN TPU DESMOPAN US-65AU10

Utechllan/Desmopan is a thermoplastic block copolymer characterized by a wide range of properties. Its linear polymeric chains consist of alternating flexible, elastic segments with a low glass transition temperature and rigid crystalline segments with a high melting point. It is the modification of these phases that create the different properties such as hardness, strength, rigidity, elasticity and cold-flexibility, always depending on the requirements of the application.

Desmopan 1045D
A95,injection molding grade; hydrolysis-stabilised; high mechanical strength; Injection molded engineering parts; Ear-tags; Shoe heels.
,
Desmopan 150
A96,TPU on the basis of a standard ester.
Ski boots, castors, shoe heels, technical injection molding parts
,
Desmopan 2586A
A86,Extrusion grade; Grade for calandering; does not contain any anti-hydrolysis agent; Application; Textile coating.
,
Desmopan 3065D
D65,injection molding grade; high mechanical strength; excellent abrasion resistance; good wear resistance; Application; Technical parts.
,
Desmopan 3070AU
A70,UV,injection molding grade; free from plasticizers; Application; Injection molded engineering parts; hard - soft systems.
,
Desmopan 3072D
D73,injection molding grade; high mechanical strength; excellent abrasion resistance; good wear resistance; Application; Technical parts.
,
Desmopan 3385A
A85,Extrusion- and injection molding grade; good wear resistance; Application; hard - soft systems; Hoses, non-reinforced; Profiles; Injection molded engineering parts.
,
Desmopan 452
D50~54,injection molding grade; grease and oil-resistant; hydrolysis-stabilised; low compression set; good wear resistance; Application; Injection molded engineering parts; Automotive engineering.
,
Desmopan 588 E
A85,Extrusion- and injection molding grade; improved microbial resistance; Improved hydrolysis resistance; Application; Cable sheathings; Hoses, non-reinforced; Roof lining.
,
Desmopan 9385A
Extrusion- and injection molding grade; very good hydrolysis and microbial resistance; good low-temperature flexibility; complies with VDE 0282-10; Application; Cable sheathings; Hoses, non-reinforced.
,
Desmopan DP 3055D
A96,injection molding grade; with high mechanical strength for articles subject to wear; excellent abrasion resistance; good wear resistance; Application; Injection molded engineering parts; Rollers
,

Desmopan 85085A DPS055.
aliphatic thermoplastic polyurethane block copolymer grade. Provides improved hydrolysis- and microbial resistance, good low-temperature flexibility and no yellowing under the action of UV light.

,

Desmopan 5377A
Extrusion- and injection molding grade; improved microbial resistance; Improved hydrolysis resistance; Application; Textile coating; Wristwatch straps; hard - soft systems

Desmopan 5377A - Excellent bonding to ABS
Desmopan 5377A offers good bonding behaviour to ABS. After the ABS-component has been injection moulded, the flexible TPU component in Desmopan® 5377A is injected onto the ABS while it is still hot.

Desmopan DP 9868DU
A98,Extrusion- and injection molding grade; very good hydrolysis and microbial resistance; very good low-temperature impact strength; Application; Boot shells; Technical parts.
,

Desmopan DP 8798A
A98,injection molding grade with special UV stabilizers,Easy release short cycle times.
Sports shoe soles.
,
Desmopan 3092 AU DPS105
A92,injection molding grade; free from plasticizers; Application; Injection molded engineering parts; hard to soft systems.
,
Desmopan KA 8377
A97,injection molding grade; modified with ABS; good low-temperature flexibility; good wear resistance; Application; Ski boot shells.
,
Desmopan VP KU 2-8651
A77,highly flexible TPUs are used, such as Desmopan KU 2-8651 (special ether, 75 Shore A), then inferior adhesion will result. The relatively low melt temperature of this product means that it will not have a sufficiently
high heat capacity to soften the contact surface of the rig.
,

**Any about Desmopa TPU please contact e-mail: x.g.chiang@gmail.com