Solvay AvaSpire PAEK (polyaryletherketone)
high-performance polyketones tailored to fill cost and performance gaps between PEEK and other high-performance polymers. For example, ductility and toughness can be significantly improved versus comparable grades of PEEK, delivering 20% higher tensile elongation at yield and doubled tensile elongation at break values.
Higher stiffness than PEEK from 150°C to 190°C
Improved ductility and toughness
Excellent chemical resistance
UL 94 V0 rating at 0.8 mm
Excellent aesthetics and colorability
Highest performing unreinforced AvaSpire grade, tough, better ductility and higher HDT than comparable PEEK, low melt flow for extrusion and injection molding.
AvaSpire AV-651 GF30 BK (instead of Victrex PEEK 150GL30 &Victrex PEEK 450GL30)
30% glass fiber, better chemical resistance than AV-621, high melt flow for injection molding.
AvaSpire AV-651 GS30 BK ACC13 & ACC03
30% glass sphere(glass bead) reinforced PAEK resin.
AvaSpire AV-651 CF30 BK
30% carbon fiber reinforced grade,
AvaSprre AV-750 GF40
40% glass fiber,high melt flow for injection molding
AVASPIRE PAEK INVENTORY
|AvaSpire AV-651 GF30 BK
|AvaSpire AV-651 GS30 BK ACC13
|AvaSpire AV-651 GS30 BK ACC03
Higher stiffness than PEEK from 150 °C to 200 °C
AvaSpire® AV-651 has a modulus twice that of unfilled PEEK at 180 °C (356 °F). AvaSpire® AV-651 GF30 provides a modulus that is 30% higher than comparable PEEK material at the same temperature.
AvaSpire® AV-651 exhibits 20% higher elongation at yield than of unfilled PEEK. Tensile elongations at break values are at least twice as high as comparable PEEK grades.
**Any inquire about PAEK/PEEK materials contact e-mail: firstname.lastname@example.org