|
德國Frisetta公司PA66 FRIANYL：
紅磷阻燃UL94-V0/端子行業／符合IEC 60335-1 ED.4.0環保阻燃尼龍阻燃0.38毫米，RTI指數130℃，符合歐洲ROHS&WEEE環保要求.替代LCP,PPA,PA46等超高溫特種工程塑料！適用電子,電器和汽車領域需要耐高溫,高CTI,RTI,HWI和高硬度和尺寸穩定性的場合滿足無鉛製程的SMT 工藝.適合端子行業！
|
| FRIANYL A63 V0 |
Nylon 6.6 for injection moulding, flame retardant, free of halogen and phosphorus (rated UL 94 V0). |
|
|
|
| |
FRIANYL A63 AV15 |
Nylon 6.6 for injection moulding, 15% aramid powder reinforced. High abrasion resistance at good lubricating properties. |
| |
|
|
| |
FRIANYL A63 AV20 |
Nylon 6.6 for injection moulding, 20% aramid powder filled. Provisional Data Sheet ! |
| |
|
|
| |
FRIANYL A63 CV10 |
Nylon 6.6 for injection moulding, 10% carbon fibres reinforced (good conductive and electrostatical properties). |
| |
|
|
| |
FRIANYL A63 CV15 |
Nylon 6.6 for injection moulding, 15% carbon fibres reinforced (good electrical conductivity and antistatical properties - surface resistance 1 E 5 - 1 E 6 OHM). |
| |
|
|
| |
FRIANYL A63 CV20 |
Nylon 6.6 for injection moulding, 20% carbon fibres reinforced (good electrical conductivity and antistatical properties - surface resistance 2,1 E 13 OHM). |
| |
|
|
| |
FRIANYL A63 CV30 |
Nylon 6.6 for injection moulding, 30% carbon fibres reinforced (good conductive and electrostatical properties). |
| |
FRIANYL A63 GV10 |
Nylon 6.6 for injection moulding, 10% glass fibres reinforced. |
| |
|
|
| |
FRIANYL A63 GV15 |
Nylon 6.6 for injection moulding, 15% glass fibres reinforced. |
| |
|
|
| |
FRIANYL A63 GV20 |
Nylon 6.6 for injection moulding, 20% glass fibres reinforced. |
| |
|
|
| |
FRIANYL A63 GV25 |
Nylon 6.6 for injection moulding, 25% glass fibres reinforced. |
| |
|
|
| |
FRIANYL A63 GV30 |
Nylon 6.6 for injection moulding, 30% glass fibres reinforced. |
| |
FRIANYL A63 V0GV30 |
Nylon 6.6 for injection moulding, free of halogen and phosphorus, 30% glass fibres reinforced. (rated UL 94 V0) |
|
|
|
|
|
