(美国)Ticona公司 Celcon共聚甲醛在很宽的温度范围内，保持高强度和高刚性。而且它具有低磨耗、高韧性和抗反复冲击。这些产品因其优异的尺寸稳定性、长期抗蠕变性、长期抗疲劳、耐湿、耐化学，以及耐燃油而著名。它们甚至耐氧化性燃油和酒精汽油混合燃料。Celcon产品被广泛地应用于注塑成型，但也同样适用于其它传统加工技术，如挤出、压塑、滚塑和吹塑等工艺成型。此外，Celcon共聚甲醛也可与热塑性弹性体一起进行双组分（软硬双组分）成型，热塑性弹性体包括苯乙烯基弹性体(SEBS)等。

Celcon共聚甲醛产品有不同粘度的非填充级品级，以及玻纤增强、冲击改性、抗UV、低光泽、静电消散、低磨耗、抗漂白剂和可激光雕刻等特殊品级。有些特殊品级为燃油系统和供水管道应用提供了特别优异的性能。Celcon有符合FDA、UL和NSF标准的品级。符合美国药典VI的医疗（MT™）品级是干粉吸入器、胰岛素笔和其它医疗设备用材的杰出候选者，并已在美国药物主文件档案中列档（DMF，No.16661）。所有Celcon产品都可以进行几乎是任何一种配色，而且色料不含有重金属元素，如镉、汞、铅、铬(VI)等

由于它的多功能性，Celcon产品被广泛地应用在各种领域中。比如齿轮、弹簧、夹子、卡扣、门把、燃油系统部件的衬垫、玩具元件、洗衣机元件、手动工具部件、淋浴莲花篷头、安全带卡扣等。Celcon亦可以用来制备薄板、圆棒和厚板等坯型材，并可通过机加工来制造高精度零件

Celcon M25  M25UV    熔指: 2.2 cm³/10min

Celcon M50 熔指: 4.3 cm³/10min

Celcon LW90熔指: 8 cm³/10min

Celcon M90   M90UV    熔指: 8 cm³/10min

Celcon M140  ,M140-L1,   熔指: 12 cm³/10min

Celcon M270  M270UV    熔指: 23 cm³/10min

Celcon M450熔指: 39 cm³/10min

自然色NAT ,黑色BLK

美国Ticona改性聚甲醛POM Celcon　M90系列:

Celcon M90一般用途General purpose, good optimization of properties

Celcon M90UV 耐候UV稳定 UV stabilized, general purpose grade

Celcon M90XAP 汽车内部产品Low emission grade based on Celcon M90™ for interior automotive

Celcon M90AW 低负荷 ,高速应用Low wear, low noise, for low load, high speed applications

Celcon M90SW 高负荷,低速应用Low wear, low noise for high load, low speed applications.

美国Ticona改性聚甲醛POM Celcon　LW90系列:

Celcon LW90底磨损Low wear, high speed, low load

Celcon LW90-F2 低票准PTFE填充Low wear/friction, low level PTFE modification, standard product

Celcon LW90-F5高票准PTFE填充Low wear/friction, highest level PTFE modification

Celcon LW90FS-K硅树脂和高票准PTFE填充Low wear based on silicone and high PTFE modification

Celcon LW90-SC硅树脂和TICONA公司其他的产品浓缩Low friction, silicone concentrate for use with other Ticona products.

Celcon LW90-S2 硅树脂填充Low wear/friction, silicone modified, low speed, high load

耐冲击Impact Modified等级:

Celcon TX90 冲击改良Improved practical impact

Celcon TX90PLUS高冲击性High practical impact

Celcon TX86  冲击改良Improved practical impact

玻纤 改良等级:

Celcon GC10(POM+10%GF玻纤)10% glass fiber, has been replaced with Hostaform® C 9021 GV1/10.

Celcon GC15(POM+15%GF玻纤)15% glass fibers, coupled for improved stiffness

Celcon GC20(POM+20%GF玻纤)20% glass fiber, has been replaced with Hostaform® C 9021 GV1/20

Celcon GC25A(POM+25%GF玻纤)25% glass fibers, coupled for improved stiffness, standard grade

Celcon GC25T(POM+25%GF玻纤)高强度,发动机燃油FUEL抵抗25% glass fibers, coupled for improved stiffness, high strength, improved fuel resistance

Celcon GC25TF(POM+25%GF玻纤)高强度,发动机燃油FUEL抵抗 ,薄壁产品25% glass fibers, coupled for improved stiffness, high strength, fuel resistant, and high flow for thin parts

玻珠 改良等级:

Celcon GB10(POM+10%GB玻珠)10% glass bead, low warpage, has been replaced by Hostaform® GV3/10

Celcon GB25(POM+25%GB玻珠)25% glass bead filled for stiffness, low warpage

汽车用防紫外线UV resistant - automotive等级:

Celcon UV90Z一般用途UV resistant - automotive, general purpose grade, broad range of UV90Z colors

矿物填充Mineral Reinforced等级:

Celcon MC90 添加矿物质，低翘曲Mineral coupled for reduced warpage, general purpose grade

Celcon MC90HM添加矿物质，高模量,低翘曲 Mineral coupled for reduced warpage, high modulus, moderate flow

Celcon MC270 添加矿物质，高流动,低翘曲Mineral coupled for reduced warpage, high flow

Celcon MC270HM 高流动性,低翘曲,高模量Mineral coupled for reduced warpage, high modulus, high flow

 .