(LANXES杜力顿PA6)
Lanxess是德国朗盛集团生产的尼龙原料的注册商标，目前产地于泰国厂生产，相关产品包含SAN、PA、PBT防火无卤素等相关产品
PA6(无增强)
1.优良外观
2.良好加工及颜色效果
3.电器绝缘性能佳
4.食物接触
5.抗化学性能
6.可用于外壳应用
7.低吸湿，增强韧性或防火选择
Durethan®B40 (透明)
Durethan®B30S (半透明)
PA66/6(玻纤增强)
1.耐热及提高热变形温度
2.增强产品冲击性能
3.内部热绝缘部份
4.有防火，增韧级
Durethan B 30 S 000000
PA 6, injection molding-grade, non-reinforced, easy-flow, easy-release, rapid solidification
Durethan B 40 E 000000
PA 6 extrusion grade, standard grade of high viscosity with processing aid/lubricant, not nucleated., Extruded semi-finised products made by the cooled-die process. Solid rods up to approx. 250 mm in diameter. Tube extrusion by the water tank calibration method up to a diameter of approx. 50 mm, corrugated pipes.
Injection molding of casters and rollers.
Durethan BC 30 000000
PA 6, injection molding grade, non-reinforced, rapid processing, higher notched impact strength than B 30 S / B 31 SK in dry and conditioned state, impact-modified, automotive: window-handle, cable clips, safty belt covers, wall-pegs, dowels, tool-handels
Durethan BKV 130 000000
CoPA, injection molding grade, 30 % glass fibers, elastomer modified, electroplateable, higher notched impact strength and also higher energy absorption under biaxial impact load than BKV 30, even in the dry state, Automotive seats and back rests, office chair-legs, seat-pans, full-plastic shopping-car
Durethan BKV 130 H2.0 901510
CoPA, injection molding grade, 30 % glass fibers, elastomer-modified, electroplateable, improved notched impact strength and energy absorption under biaxial impact load, good heat-ageing resistance
Durethan BKV 140 000000
CoPA, injection molding grade, 40 % glass fibers, elastomer-modified, electroplateable, higher notched impact strength and also higher energy absorption under biaxial impact load than BKV 40, even in the dry state
Durethan BKV 15 H1.0 000000
CoPA, injection molding grade, 15 % glass fibers, good heat-ageing resistance, Automotive indoor window frames
成型建议 :
乾 燥：80℃ /5小时 射出温度：265~310℃
模温：60~90℃
|
|
|
|
|
